CALL US : +1-301-705-7027

New Products


Shorai Lithium Battery Charger

Shorai Charge and Store Battery Management System - For Shorai LFX lithium batteries only. The best possible charger/tender for Shorai LFX is the SHO-BMS01. It uses the 5-pin BMS port in the LFX batteries, in order to monitor, diagnose, and balance the individual cells during charge. And it also has an optimized storage mode that will give the longest possible service life to your LFX. While standard lead-acid chargers can be used with Shorai LFX when needed, the BMS01 is specifically designed to charge, store, maintain, balance, and diagnose your LFX battery. ---------------------------------------------------------------------------- Specs: - STORE MODE for Maximum Battery Life During Long-Term Storage - CHARGE MODE Charges, Balances & Performs Cell Diagnostics - Retractable Hook to Hang from Grips, Frame Rails or Seat Straps - 100V~250V 50/60Hz AC Input - 2A Max Charge Rate - Includes: Shorai LFX Charger, AC Power Cable, Battery Cable for LFX 12V, - - Charge Cable for LFX 12V - Supports Various unlisted makes/models

Price: $81.99
Shorai Lithium Battery 12V 14Ah

12V, 14Ah Shorai Xtreme-Rate LiFePO4 LFX "L" Polarity Lithium Iron Battery will hold a charge for one year without maintenance and is ultra light with an average weight of one fifth the weight of lead-acid batteries. The 14Ah is generally recommended for vehicles up to 500cc. Also, ideal for use on the Honda Ruckus. If the LFX is slightly smaller than the original battery in one dimension or another, high-density, adhesive-backed foam sheets are included in the package. These can be trimmed and applied to the battery box in minutes, to make a solid fit, and with added thermal and vibration insulation. Please Note: not for use in electric scooters. ---------------------------------------------------------------------------- Specs: - Model Number: LFX14L2-BS12 - Length: 113mm (4.45 inches) - Width: 58mm (2.28 inches) - Height: 89mm (3.50 inches) - "L" Polarity = [- +] - CCA (cold cranking amps): 210 - No More Dead Batteries - Holds Charge For 1 Year Without Maintenance - Ultra Light - One Fifth The Weight of Lead Acid Batteries On Average - Zero Sulfation For Longer Service Life - Drop-In Replacement For Your OEM Battery - Military Spec Carbon Composite Case - Faster Cranking For Better Starts - Super Fast Recharge Rate - SAFE - No Explosive Gasses During Charge, No Lead, No Acid - Environmentally Friendly - Just Discharge & Dispose - Japanese Engineering - 3 Year Warranty! - Supports Honda Ruckus, Various unlisted makes/models

Price: $156.99
12V 12AH Battery YTX14-BS - Factory Activated

Universal Parts 12 Volt 12 Amp YTX14-BS Battery. Fits full-size scooters, mopeds, ATVs, motorcycles, and much more. Factory Activated - Ready to Install! Replaces the Following Models: 01-345, 26012-1414, 26012-1302, 26012-1279, 26012-1411, 26012-1410, 31500-HC4-726AH, 65948-00A, ES14BS, FTX14-BS, KMX14-BS, LT14-4, PTX14-BS, WP14-BS *All Sales on Clearance Items are Final* ---------------------------------------------------------------------------- Specs: - Length: 5.94 inches (151mm) - Width: 3.40 inches (87mm) - Height: 5.77 inches (147mm) - Factory Activated - Ready to Install! - Supports Various unlisted makes/models

Price: $61.99
12V 9AH Battery YTZ12S - Factory Activated

Universal Parts 12 Volt 9 Amp YTZ12S Battery. Fits full-size scooters, mopeds, ATVs, dirt bikes, motorcycles, off-road vehicles and much more. Factory Activated - Ready to Install! Replaces the Following Models: 31500-MCF-643AH, FAITZ12S, FAYTZ12S, LTZ12-4, PTZ12S, GTZ12S, M7212A, 44215 Please Note: All Sales on Clearance Items are Final. ---------------------------------------------------------------------------- Specs: - Length: 5.94 inches (151mm) - Width: 3.40 inches (87mm) - Height: 4.31 inches (110mm) - Factory Activated - Ready to Install! - Supports Various unlisted makes/models

Price: $58.99
12V 8.5AH Battery YTX9-BS - Factory Activated

Universal Parts 12 Volt 8.5 Amp YTX9-BS Battery. Fits full-size scooters, mopeds, ATVs, dirt bikes, motorcycles, off-road vehicles and much more. Factory Activated - Ready to Install! Replaces the Following Models: 26012-1261, 31500-156-001, 31500-HN1-003, 6MF8, CTX9-BS, ES9BS, GTX9-BS, M329BS, M429BS, PTX9-BS, XTAX9-BS, LT9-4 ---------------------------------------------------------------------------- Specs: - Length: 5.94 inches (151mm) - Width: 3.40 inches (87mm) - Height: 4.20 inches (107mm) - Factory Activated - Ready to Install! - Supports Various unlisted makes/models

Price: $47.99
12V 8AH Battery YTZ10S - Factory Activated

Universal Parts 12 Volt 8 Amp YTZ10S Battery. Fits full-size scooters, mopeds, ATVs, dirt bikes, motorcycles, off-road vehicles and much more. Factory Activated - Ready to Install! Replaces the Following Models: 44210, 31500-MCJ-642, 31500-MCJ-642AH, CTZ10S, FAITZ10S, FAYTZ10S, GTZ10S, LTZ10-4, M7210A, MFA12V7AH, MF12V7-1A, PTZ10S Please Note: All Sales on Clearance Items are Final. ---------------------------------------------------------------------------- Specs: - Length: 5.94 inches (151mm) - Width: 3.40 inches (87mm) - Height: 3.70 inches (94mm) - Factory Activated - Ready to Install! - Supports Various unlisted makes/models

Price: $57.99
12V 6AH Battery YTX7A-BS - Factory Activated

Universal Parts 12 Volt 6 Amp YTX7A-BS Battery. Fits full-size scooters, mopeds, ATVs, dirt bikes, motorcycles, off-road vehicles and much more. Factory Activated - Ready to Install! ---------------------------------------------------------------------------- Specs: - Length: 5.94 inches (151mm) - Width: 3.40 inches (87mm) - Height: 3.70 inches (94mm) - Factory Activated - Ready to Install! - Supports Various unlisted makes/models

Price: $37.99
12V 6AH Battery YTZ7S - Factory Activated

Universal Parts 12 Volt 6 Amp YTZ7S Battery. Fits full-size scooters, mopeds, ATVs, dirt bikes, motorcycles, off-road vehicles and much more. Factory Activated - Ready to Install! Replaces the Following Models: 44200, 31500-HP1-601AH, CTZ7S, FAITZ7S, FAYTZ7S, GT6B-3, GTZ7S, LTZ-73, LTZ7-3, M727ZS, MF12V5-1A, MF12V6.5, PTZ7S ---------------------------------------------------------------------------- Specs: - Length: 4.45 inches (113mm) - Width: 2.70 inches (69mm) - Height: 4.20 inches (107mm) - Factory Activated - Ready to Install! - Supports Honda Ruckus 50 (NPS50), Various unlisted makes/models

Price: $47.99
12V 4.5AH Battery YTX5L-BS - Factory Activated

Universal Parts 12 Volt 4.5 Amp YTX5L-BS Battery. Fits full-size scooters, mopeds, ATVs, dirt bikes, motorcycles, off-road vehicles and much more. Factory Activated - Ready to Install! ---------------------------------------------------------------------------- Specs: - Length: 4.43 inches (113mm) - Width: 2.72 inches (69mm) - Height: 4.14 inches (105mm) - Factory Activated - Ready to Install! - Supports Various unlisted makes/models

Price: $30.99
12V 6AH Battery YTZ7S

Universal Parts 12 Volt 6 Amp YTZ7S Battery - Maintenance Free Dry AGM w/Acid Pack. Fits full-size scooters, mopeds, ATVs, dirt bikes, motorcycles, off-road vehicles and much more.Used on the Honda Ruckus and Metropolitan. Replaces the Following Models: 44025, GT6B-3, M727ZS, FAYTZ7S. **Note: This product is a ORM-D (Other Regulated Item, Domestic) regulated item and ships via FedEx Ground to the lower 48 states only. Various unlisted makes/models ---------------------------------------------------------------------------- Specs: Length: 4.4 inches (112mm) Width: 2.70 inches (69mm) Height: Height: 4.12 inches (105mm) Includes Acid Pack Set-Up Instructions All AGM battery electrolyte containers are not the same. Each contains the proper amount of electrolyte for its specific battery. Before filling, read the electrolyte handling instructions and precautions on the label. Do not smoke when activating a battery or handling battery acid. Always wear plastic gloves and protective eye wear and be sure to read the Battery Safety section in this manual. The following seven steps should be used to activate an AGM battery: 1. The battery must be out of the vehicle and placed on a level surface. 2. Remove electrolyte container from the plastic storage bag. Remove the strip of caps. Put the strip aside as you will use it later to seal the battery cells. For battery filling use only the dedicated acid container that comes with the battery as it contains the proper amount of electrolyte for that specific battery. This is important to service life and battery performance. Do not pierce, or otherwise open the foil seals on the electrolyte container. Do not attempt to separate the individual electrolyte containers. 3. Place the electrolyte container with the foil seals facing down into the cell filler ports on the battery. Hold the container level and push down to break the foil seals. Electrolyte will start to flow into the battery and air bubbles will be seen inside the container. Do not tilt the electrolyte container. 4. Check the electrolyte flow. Keep the container in place until it empties completely. If no air bubbles are coming up from the filler ports, or if container cells haven’t emptied completely after 20 minutes, tap the container and/or battery case a few times to cause the electrolyte to flow into the battery. Do not remove the acid container from the battery until it is completely empty. The battery requires all of the electrolyte from the container for proper operation. Bubbles will appear as the electrolyte container fills the battery indicating the flow of battery acid. Tap the container periodically to keep the electrolyte flowing until the container is completely empty. Never puncture the top of the acid container to speed up the filling process. 5. Remove the empty electrolyte container from the battery. Fully insert the strip of sealing caps (previously removed from the electrolyte container) into the battery filling ports. Make sure the strip of caps is fully inserted and flush with the top of the battery. Insert the caps by hand, do not use a hammer or excessive force. Never remove the strip of caps or add water or electrolyte to the battery during its service life. 6. For batteries with ratings of less than 18 AH, let the battery stand for 20 to 60 minutes. For batteries with higher AH ratings allow the battery to stand for 1 to 2 hours. Universal Parts AGM batteries have the amp hour (AH) printed on the front of the battery case. The stand, or rest period, allows the electrolyte to permeate into the plates for optimum performance. 7. Newly activated AGM batteries require an initial charge. After adding electrolyte, a new battery is approximately 75-80% charged. After the “stand” period (step 6), charge the battery to bring it to a full state-of charge. The battery charger used for initial charging should be able to charge at 12.8+-volts for an AGM battery. Various unlisted makes/models

Price: $37.99